Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the land where development implications exist to reduce visual impacts in scenic areas, as designated by the relevant NSW environmental planning instrument. Contact data.broker@environment.nsw.gov.au for a data package (shapefile)
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [169, 0, 230, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 5 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Name: Special Purposes (Marinas and Boat Building and Repair Facilities)
Display Field: EPI_NAME
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 5 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset is the area of land identified as the Sydney drinking water catchment in the State Environmental Planning Policy (Sydney Drinking Water Catchment) 2011.
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies areas of land showing the extent of acid sulfate soils. Acid sulfate soils have been classified into 5 different classes based on the likelihood of the acid sulfate soils being present in particular areas and at certain depths. * Class 1: Acid sulfate soils in a class 1 area are likely to be found on and below the natural ground surface. * Class 2 : Acid sulfate soils in a class 2 area are likely to be found below the natural ground surface. * Class 3: Acid sulfate soils in a class 3 area are likely to be found beyond 1 metre below the natural ground surface. * Class 4: Acid sulfate soils in a class 4 area are likely to be found beyond 2 metres below the natural ground surface. * Class 5: Acid sulfate soils are not typically found in Class 5 areas. Areas classified as Class 5 are located within 500 metres on adjacent class 1,2,3 or 4 land. Contact data.broker@environment.nsw.gov.au for a data package (shapefile)
Description: This spatial dataset identifies the maximum floor space ratio that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies areas subject to Heritage conservation as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum height of a building that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the maximum floor space ratio that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the minimum lot size that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum height of a building that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the land where development implications exist due to the land being defined as Active Street Frontages (intended to attract the pedestrian traffic along certain ground floor street frontages) as designated by the relevant NSW environmental planning instrument. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies land allocated as Key Sites requiring future development to meet standards of design excellence as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset next to the airport noise value and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the land allocated to Urban Release Areas as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum floor space ratio that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the minimum lot size that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum height of a building that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the land where development implications exist due to the presence of terrestrial biodiversity as designated by the relevant NSW environmental planning instrument. The data identifies areas of biodiversity in NSW. Contact data.broker@environment.nsw.gov.au for a data package (shapefile)
Description: This spatial dataset identifies the maximum floor space ratio that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the minimum lot size that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum height of a building that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies lands with additional permitted uses designated beyond those already allowed under a given land use zone as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset next to the additional permitted uses value and this EPI can be investigated on the NSW legislation website. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies the land where development implications exist due to the presence of terrestrial biodiversity as designated by the relevant NSW environmental planning instrument. The data identifies areas of biodiversity in NSW. Contact data.broker@environment.nsw.gov.au for a data package (shapefile)
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum floor space ratio that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum height of a building that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies areas subject to Heritage conservation as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the minimum lot size that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the land where development implications exist due to the land being defined as Active Street Frontages (intended to attract the pedestrian traffic along certain ground floor street frontages) as designated by the relevant NSW environmental planning instrument. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies lands with additional permitted uses designated beyond those already allowed under a given land use zone as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset next to the additional permitted uses value and this EPI can be investigated on the NSW legislation website. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies areas of land showing the extent of acid sulfate soils. Acid sulfate soils have been classified into 5 different classes based on the likelihood of the acid sulfate soils being present in particular areas and at certain depths. * Class 1: Acid sulfate soils in a class 1 area are likely to be found on and below the natural ground surface. * Class 2 : Acid sulfate soils in a class 2 area are likely to be found below the natural ground surface. * Class 3: Acid sulfate soils in a class 3 area are likely to be found beyond 1 metre below the natural ground surface. * Class 4: Acid sulfate soils in a class 4 area are likely to be found beyond 2 metres below the natural ground surface. * Class 5: Acid sulfate soils are not typically found in Class 5 areas. Areas classified as Class 5 are located within 500 metres on adjacent class 1,2,3 or 4 land. Contact data.broker@environment.nsw.gov.au for a data package (shapefile)
Description: This spatial dataset identifies land allocated as Key Sites requiring future development to meet standards of design excellence as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset next to the airport noise value and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies areas subject to Heritage conservation as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum floor space ratio that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the minimum lot size that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum height of a building that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the land where development implications exist due to the land being defined as Active Street Frontages (intended to attract the pedestrian traffic along certain ground floor street frontages) as designated by the relevant NSW environmental planning instrument. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the land allocated to Urban Release Areas as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies land allocated as Key Sites requiring future development to meet standards of design excellence as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset next to the airport noise value and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies areas subject to Heritage conservation as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land that is reserved for acquisition by an authority of the State or land to which the owner-initiated acquisition provisions in Division 3 of Part 2 of the Land Acquisition (Just Terms Compensation) Act 1991 applies, as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefiles).
Value: Outer Sydney Orbital Corridor (Under Consideration) Label: Outer Sydney Orbital Corridor (Under Consideration); Outer Sydney Orbital (Under Consideration) Description: N/A Symbol:
Value: Outer Sydney Orbital (Under Consideration) Label: Outer Sydney Orbital Corridor (Under Consideration); Outer Sydney Orbital (Under Consideration) Description: N/A Symbol:
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies the land where development implications exist due to the presence of terrestrial biodiversity as designated by the relevant NSW environmental planning instrument. The data identifies areas of biodiversity in NSW. Contact data.broker@environment.nsw.gov.au for a data package (shapefile)
Description: This spatial dataset identifies land where development implications exist due to the Obstacle Limitations Surface for certain airports, as designated by the relevant NSW environmental planning instrument (EPI). The Environmental Planning Instrument (EPI) contains provisions relating to airspace operations, and restricts certain development that penetrates the identified surface. These are "Additional Local Provisions" that can be found in Part 6 or Part 7 of the EPI. Contact data.broker@environment.nsw.gov.au for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies land where a variety of planning requirements apply as found in Part 5 'Miscellaneous provisions', or Part 6 'Additional Local Provisions', of the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset and this EPI can be investigated on the NSW legislation website Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies the land where development implications exist due to the risk of flood as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset. Contact data.broker@environment.nsw.gov.au for a data package (shapefile)
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies land where development implications exist due to presence of mineral and extractive resources, as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset next to the Mineral and Extractive value and this EPI can be investigated on the NSW legislation website Contact data.broker@environment.nsw.gov.au for a data package (shapefile)
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies lands with additional permitted uses designated beyond those already allowed under a given land use zone as designated by the relevant NSW environmental planning instrument (EPI). The specific EPI which defines the planning requirement is described in the dataset next to the additional permitted uses value and this EPI can be investigated on the NSW legislation website. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile)
Description: This spatial dataset identifies areas subject to Heritage conservation as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the maximum height of a building that is permitted on land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies land use zones and the type of land uses that are permitted (with or without consent) or prohibited in each zone on any given land as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Land use zones are grouped into the following broad categories: BUSINESS (B), ENVIRONMENT (E), INDUSTRIAL (IN), RESIDENTIAL (R), RECREATION (RE), RURAL (RU), SPECIAL (SP) and WATERWAYS (W). The specific EPI which defines the planning requirement is described in the attribute field LEP_Name. The EPI can be viewed on the NSW legislation website: www.legislation.nsw.gov.au Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 7 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Name: CBD Rail Link or CBD Metro (Zone B - Tunnel) (TfNSW)
Display Field: EPI_NAME
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Description: This spatial dataset identifies the boundaries of land to which a NSW Standard Instrument Local Environmental Plan applies including areas which may be excluded or deferred as designated by the relevant NSW environmental planning instrument (EPI) under the Environmental Planning and Assessment Act 1979. Contact _data.broker@environment.nsw.gov.au_ for a data package (shapefile).
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 8 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: center Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 6 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: This spatial dataset identifies the land where development implications exist to reduce visual impacts in scenic areas, as designated by the relevant NSW environmental planning instrument. Contact data.broker@environment.nsw.gov.au for a data package (shapefile)